이 글을 읽어보시기 바랍니다. Electro-optical control of polarization in femtosecond-laser written waveguides using an embedded liquid crystal cell

이 과학 간행물에서는 조정 가능한 파장판을 FLDW 광 회로에 내장하는 새로운 접근 방식을 소개합니다. 이 방법은 도파관에 액정 층을 통합하여 이를 달성합니다. 인가 전압을 통해 액정의 방향을 제어하면 바이어스 의존 위상 지연을 유도하여 전압 의존형 파장판으로 효과적으로 작동합니다.

비문 설정 스케치 (/2- 반파판, Pol.- 편광판, SHG – 두 번째 고조파 생성을 위한 비선형 수정).)@Kim Lammers, Alessandro Alberucci, Chandroth P. Jisha, Alexander Szameit, and Stefan Nolte, “Electro-optical control of polarization in femtosecond-laser written waveguides using an embedded liquid crystal cell,” Opt. Mater. Express 14, 836-846 (2024)

The post 내장형 액정 셀을 사용하여 펨토초 레이저 기록 도파관에서 편광의 전기 광학 제어 appeared first on Amplitude.

« A recent battery manufacturing project—affectionately called BatMan—has developed a novel laser patterning process to microstructure of battery electrode materials. Funded by DOE’s Advanced Materials and Manufacturing Technologies Office, this project brings together expert minds from the National Renewable Energy Laboratory, Clarios, Amplitude Laser, and Liminal Insights. This revolutionized manufacturing process could unlock significant improvements to electrified transportation, leading the charge toward a brighter and more sustainable future. (…) Researchers used an Amplitude Laser femtosecond laser system with high-speed galvanometer-controlled scanning optics for the laser ablation, working closely with the Amplitude team to achieve precise control of the laser based on position, power, frequency, and number of pulses. NREL researchers led by Donal Finegan fine-tuned those parameters to optimize the process.

“Our collaboration with NREL helped integrate the laser into their existing research capabilities to support the BatMan project goals,” said Quentin Mocaer. “We also received valuable insights into how future system designs and new technologies could further improve this process at an industrial scale.”
Writes Rebecca Martineau, Feb 13th, 2024 for her article “Unleashing the Power: BatMan Project Revolutionizes Battery Manufacturing”

@Illustration-by-Alfred-Hicks

Results in brief:

The team National Renewable Energy Laboratory researcher Nathan Dunlap has demonstrated superior FAST-CHARGE PERFORMANCE with nearly 100% more capacity after 800 cycles for electrodes patterned with our lasers. It also shows great improvement in wetting time, beneficiating from channels allowing better Li ions propagation.

Cost-analysis simulations using the Battery Performance and Cost Model indicate industrial adoption would require minimal capital and operational investment, resulting in only ≈ 1-2 $/kWh for a 50 MWh factory. As commercially available, industrial, ultrafast lasers approach the 1 kW average power threshold, there is interest in realizing the above-described benefits to LIB performance in high-throughput electrode manufacturing lines.

About Amplitude
Amplitude designs femtosecond laser solutions to support our customer’s projects, from the simplest to the most complex, from the moment the idea is in mind through to implementation and beyond.​ Amplitude is committed to technological excellence in laser technology, positively impacting our future in matters of health, science, and industry.​ As agile experts, we bring the widest range of technologies to bear on niche needs, don’t hesitate to contact us !

The post Amplitude and NREL’s Precision Laser Strategy to Enhance Battery Performance appeared first on Amplitude.

We’re thrilled to announce the upcoming Photonics and Laser Innovations (PLI) Conference 2024, taking place in the picturesque city of Bordeaux on June 18-19, 2024! Organized by CLP Laser, this conference promises to be a groundbreaking event in the field of laser technology and photonics.

Join us for two days of insightful discussions, cutting-edge presentations, and networking opportunities with experts from around the globe. The PLI Conference 2024 will feature keynote speakers, panel discussions, and interactive sessions covering the latest advancements in laser applications, photonics research, and industrial innovations.

 Key Highlights:
Date: June 18-19, 2024
Location: Bordeaux, France
Organizer: Club Laser et Procédés
Partners: ALPhANOV ALPHA-RLH, le pôle français des ondes de l’innovation, LASEA and Amplitude Laser

Explore the Future of Photonics:

• Discover the latest trends in laser technology.
• Engage with leading experts and researchers.
• Network with professionals shaping the future of photonics.

Stay Connected: Stay tuned for updates, speaker announcements, and program details by following our LinkedIn page and using the hashtag #PLIConference2024. Let’s create a vibrant community of innovators and thought leaders in the field of photonics!

Mark your calendars and join us in Bordeaux for an unforgettable experience at the PLI Conference 2024. Together, let’s illuminate the future of laser technology!

The post SAVE THE DATE: PLI Conference 24 in Bordeaux ! appeared first on Amplitude.

기사 보기

The post 안경의 펨토초 레이저 GHz-버스트 드릴링에 대한 새로운 기사 appeared first on Amplitude.

The research group of laser-matter interaction at the Institute of Intense Lasers and Applications (CELIA) at the University of Bordeaux, France, has explored a new glass micro-drilling method using a femtosecond laser in GHz-burst mode.

Schematic of the experimental setup including a side-view imaging system. Credit: International Journal of Extreme Manufacturing (2022). DOI: 10.1088/2631-7990/acaa14

Publishing in the journal International Journal of Extreme Manufacturing, the research team used a femtosecond laser from Amplitude operating in the GHz-burst regime to study a new glass micromachining method which allows for drilling taper-free, elongated holes with smooth inner walls without any cracks in the glass. Usually, laser drilling with standard single femtosecond pulses results in tapered holes of strongly limited length and rough inner surface.

This new laser-matter interaction regime makes it possible to directly drill holes of high aspect ratio in one single step without any chemical etching. The choice of the laser-burst parameters was revealed to be very important in order to achieve an outstanding micromachining quality of the machined structures. The femtosecond laser GHz-burst mode could pave the way for new applications such as microelectronics where silicon interposers are likely to be replaced by glass interposers.

The post A new glass micromachining method appeared first on Amplitude.

First, Amplitude has signed a partnership with Aivancity

“This partnership between Amplitude and Aivancity represents an opportunity to break down barriers, on one hand, for having a better understand of AI and its potential applied to lasers, and, on the other hand, for recruiting the talents of tomorrow” explains Pierre-Mary Paul VP Director Large Projects at Amplitude

And, Pierre Constant, Data Manager at Amplitude, working closely with CATIE – Centre néo-Aquitain des Technologies de l’Information et Electroniques – is making a presentation about “after sales service” data improvements thanks to Natural Language Processing – NLP. This presentation will be live on Youtube on 10 Feb at 10 a.m. CEST, at Dataquitaine event.

For attending, please subscribe here 👉 https://www.dataquitaine.com/2022/inscription

The post Amplitude involved in AI appeared first on Amplitude.

About Laser Optronic S.r.l. :

👉🏻Founded in 1975, specialized in the supply of laser sources, systems, and instrumentation in the field of photonics, optical components, mechanics, and precision automation.

👉🏻Two offices in Milan (headquarters) and Rome

The post Amplitude Signs a Partnership With Laser Optronic in Italy appeared first on Amplitude.

More interactions with Amplitude Laser from 18 to 20 October 2021 > Live chat with our American colleagues Yuliya Podobna, Neal Montgomery, and Brad DeBok

More about ICALEO >  World’s Premier Platform for Breakthrough Laser Solutions ICALEO® brings together the leaders and experts in the field of laser material interaction

📌 For attending this edition (virtual) and getting the latest in laser industry research SUBSCRIPTION HERE 

The post Amplitude Talks at ICALEO 2021 appeared first on Amplitude.

Pierre Constant, Data Manager at Amplitude, explains “Our lasers are high-technology machines requiring strong expertise when a reparation is necessary. With CATIE, we are working on digital solutions for both facilitating the collaboration between a local technician and a remote expert, and maximizing lasers operating time. Our concern is to minimize the waist of time for our customers, and then they can go back to their project, research or production with effectiveness and efficiency.”

Pierre Constant adds “Currently, we are at the Human Centered Conception stage, prototyping the most efficient solutions for the users. And in the medium term, we’ll move on additional skills in matter of Artifical Intelligence with further image processing & enrichment.”

The post Amplitude Collaborates With CATIE appeared first on Amplitude.

The post Amplitude Webinar #2: How to Optimize Quality and Productivity on Machining with the Femtotrig® Function appeared first on Amplitude.