Operating at 920 nm, the most widely used excitation wavelength for two-photon imaging, it delivers efficient excitation for multiphoton fluorescence, SHG and THG, with deep tissue penetration and high signal-to-noise ratio. It is ideally suited for calcium and voltage imaging.

Based on an all-fiber architecture, FOCUS 920 is a robust and cost-effective alternative to tunable Ti:Sapphire oscillators. It offers long-term stability without alignment, requires no expert installation, and is ready to image straight out of the box.

Operating at 40 MHz with ultrashort pulses, FOCUS 920 provides higher pulse energy than conventional 80 MHz systems at comparable average power, generating stronger fluorescence signals while reducing thermal load on the sample. The increased pulse spacing also makes it well suited for fluorescence lifetime imaging (FLIM).

Compact, stable and easy to integrate, FOCUS 920 delivers a reliable, high-performance light source for demanding multiphoton imaging applications.

The post Focus 920 appeared first on Amplitude.

Compact industrial ultrafast laser and worldwide best seller

The Satsuma product line of femtosecond laser offers versatility in the most compact air-cooled laser platform on the market. Satsuma is a cost-efficient solution providing a high repetition rate and high energy configuration, up to 175 µJ with Super Burst Mode option.

Satsuma femtosecond laser is available with green, UV, and deep UV outputs.

Versatile and full-featured, Satsuma femtosecond lasers benefit from the last new features for improvement process capability as FemtoTrig™ is a real pulse-on-demand feature with high precision for getting more precise in scan speed adjustment.

Satsuma is internationally recognized as reliable and stable, given satisfaction in a large application range such as the Ophthalmology market, specific micromachining texturing, display repair, or science applications.

Available Options

FemtoTrig

• Pulse-to-pulse control using an internal pulse picker (high precision)
• Adjustable frequency between two pulses
• Fundamental Jitter: reduced electronic delay and reduced timing Jitter

FemtoBurst

• Precision shaping for optimal energy distribution.
• Analog RF driver and function generator for precision control.

Super Burst Mode

• Single Burst Mode generates a single high-energy pulse, suitable for precision tasks.
• Burst Mode amplifies multiple pulses for uniform material processing and imaging
• Super Burst Mode concentrates energy in the initial pulse for specialized high-energy needs.

SHG

• Doubles laser frequency through non-linear optics
• Enhancing imaging precision and material processing in femtosecond lasers

THG

• Triple laser frequency for advanced applications.
• Revolutionize imaging and material processing precision in femtosecond lasers.

FHG

• Quadruples laser frequency, enabling new frontiers.
• Redefines imaging accuracy and material processing precision in femtosecond lasers.

The post Satsuma appeared first on Amplitude.

Tangor 100 is a 100W, IR, femtosecond laser combining high repetition rate AND high energy per pulse (500 µJ as standard and up to 700 µJ upon request)

Tangor 100 is available with harmonic module delivering 50W /515 nm or 30W/343 nm
Versatile and full-featured, Tangor 100 product line is available with:

• Trigger on demand for selecting individual pulses
• Super sync control for high speed synchronisation (polygon scanners)
• FemtoTrig function to adjust repetition rate with scanner speed

Available Options

FemtoTrig

• • Pulse-to-pulse control using an internal pulse picker (high precision)
  • Adjustable frequency between two pulses
  • Fundamental Jitter: reduced electronic delay and reduced timing Jitter

GHz

• • Multi-step Interaction Process: Thermal Incubation and Dynamic Efficiency
  • Optimal Burst Duration: Elevating Efficiency in Industrial Applications

Super Burst Mode

• • Single Burst Mode generates a single high-energy pulse, suitable for precision tasks.
  • Burst Mode amplifies multiple pulses for uniform material processing and imaging
  • Super Burst Mode concentrates energy in the initial pulse for specialized high-energy needs.

SHG 

• • Doubles laser frequency through non-linear optics
  • Enhancing imaging precision and material processing in femtosecond lasers

THG 

• • Triple laser frequency for advanced applications.
  • Revolutionize imaging and material processing precision in femtosecond lasers.

The post Tangor 100 appeared first on Amplitude.

Satsuma Display is based on the well-known Satsuma platform – benefiting from 10 years of product improvements and feedback from installation of nearly 2 000 units in the field. The Satsuma platform’s reliability and stability are internationally-recognized.

Thanks to the unique features of Satsuma Display, Amplitude enables Display leaders to operate with up to 4 different wavelengths using a single laser. It offers the possibility to optimize the quality of ablation to the highest level for every kind of materials, including metals, p-Si, ITO, insulator and polymers.

In addition, femtosecond pulses provide flexibility to deliver results for the most challenging processes, such as selective ablation, cutting, drilling and carbonization.

Upgrade your nanosecond or picosecond laser repair processes to femtosecond laser to increase your production yield.

Satsuma Display is robust, compact, light and air-cooled, making the integration smooth for gantry system designs.

The post Satsuma Display appeared first on Amplitude.

This laser family has been designed to ensure the highest temporal quality at both femtosecond and picosecond timescales. The beam quality is unmatched thanks to the optimal coupling between our high energy pump lasers and amplifiers. Pulsar TW reaches the highest intensities with unsurpassed energy and pointing stabilities.

The post Pulsar TW appeared first on Amplitude.

Arco – the class of ultra-intense fs laser systems designed as the ideal light source for the most demanding applications. Arco amplifiers offer outstanding performance: best-in-class output parameters packaged in robust, reliable and user friendly configurations.

The post Arco appeared first on Amplitude.

Pulsar PW is the ultimate light source dedicated to high field science, offering the best-in-class performance and bringing industrial-grade reliability to Science. Drawing on our large portfolio of pump lasers and solutions for effective thermal management, the Pulsar PW systems are designed for low (1 shot/min to 0.1 Hz) or high (1-5 Hz) repetition rates. This laser family has been designed to ensure the highest temporal quality at both femtosecond and picosecond timescales with optimized beam quality. Pulsar PW reaches the highest intensities with unsurpassed energy and pointing stabilities.

The post Pulsar PW appeared first on Amplitude.

Mango provides shorter pulses and comprehensive dispersion management, making it ideal for applications requiring higher peak intensity, such as 3P imaging, or enhanced temporal resolution.

The post Mango appeared first on Amplitude.